Dosage Calculator
Dosage Calculator
To calculate FloraMax dose rates please select from the options below then press the submit button.
INSTRUCTIONS
STEP 1
- All charts are rated for LED lights, HID and outdoor.
- ‘Regular charts’: Use for soft water with coco fibre, soil and all hydroponics except DWC.
- 'Hard water / DWC / Sensitive plants': "Hard water" applies if the water’s EC is 0.5mS or higher (avoid water's above 1.0mS). Use the regular chart if doubtful, or for aggressive strains.
STEP 2
Select the feed style. 'Aggressive' will promote dry mass, terpenes, resin and oil.STEP 3
Enter the reservoir volume.STEP 4
Specify whether the reservoir volume is in litres or US gallons.STEP 5
- Enter the water's EC (mS) here. If left blank, ignore the chart's EC values.
- Never use EC unless the meter is freshly calibrated.
- If using a “ppm” (TDS) meter, click here to find the equivalent EC value.
- CAUTION: Although foliage burn may occur if EC is "too" high, low EC’s should be avoided as they cause deficiencies and reduced yield. Note, deficiencies are often mis-interpreted as foliage burn. So, be careful. Safest remedy is to flush more regularly and feed until 10-20% run-off.